Aerohive HiveAP 20 ag, Руководство по развертыванию

Страница: 3 / 90

Deployment Guide 3
HiveAP Compliance Information
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment. This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
Important: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 centimeters (8 inches)
between the radiator and your body. This transmitter must not be co-
located or operating in conjunction with any other antenna or
transmitter.
Wireless 5 GHz Band Statements
High power radars are allocated as primary users (meaning they have
priority) of the 5250-5350 MHz and 5650-5850 MHz bands. These radars
could cause interference and/or damage to the HiveAP when used in
Canada.
The term "IC" before the radio certification number only signifies that
Industry Canada technical specifications were met.
Industry Canada - Class B
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled "Digital Apparatus," ICES-003 of Industry
Canada.
Cet appareil num é rique respecte les limites de bruits radio é lectriques
applicables aux appareils num é riques de Classe B prescrites dans la
norme sur le mat é rial brouilleur: "Appareils Num é riques," NMB-003
é dict é e par l'Industrie.
EC Conformance Declaration
Marking by the above symbol indicates compliance with the Essential
Requirements of the R&TTE Directive of the European Union (1999/5/
EC). This equipment meets the following conformance standards:
• EN 60950-1 (IEC 60950-1) - Product Safety
• EN 301 893 - Technical requirements for 5 GHz radio equipment
• EN 300 328 - Technical requirements for 2.4 GHz radio equipment
• EN 301 489-1 / EN 301 489-17 - EMC requirements for radio
equipment
Countries of Operation and Conditions of Use in the
European Community
This device is intended to be operated in all countries of the European
Community. Requirements for indoor vs. outdoor operation, license
requirements and allowed channels of operation apply in some
countries as described below.
Note: The user must use the configuration utility provided with this
product to ensure the channels of operation are in conformance with
the spectrum usage rules for European Community countries as
described below.
• This device requires that the user or installer properly enter the
current country of operation in the command line interface as
described in the user guide, before operating this device.
• This device will automatically limit the allowable channels
determined by the current country of operation. Incorrectly
entering the country of operation may result in illegal operation
and may cause harmful interference to other systems. The user is
obligated to ensure the device is operating according to the
channel limitations, indoor/outdoor restrictions and license
requirements for each European Community country as described
in this document.
• This device employs a radar detection feature required for
European Community operation in the 5 GHz band. This feature is
automatically enabled when the country of operation is correctly
configured for any European Community country. The presence of
nearby radar operation may result in temporary interruption of
operation of this device. The radar detection feature will
automatically restart operation on a channel free of radar.
• The 5 GHz Turbo Mode feature is not allowed for operation in any
European Community country. The current setting for this feature
is found in the 5 GHz 802.11a Radio Settings Window as described
in the user guide.
• The 5 GHz radio's Auto Channel Select setting described in the
user guide must always remain enabled to ensure that automatic 5
GHz channel selection complies with European requirements. The
current setting for this feature is found in the 5 GHz 802.11a Radio
Settings Window as described in the user guide.
• This device is restricted to indoor use when operated in the
European Community using the 5.15 - 5.35 GHz band: Channels 36,
40, 44, 48, 52, 56, 60, 64. See table below for allowed 5 GHz
channels by country.
• This device may be operated indoors or outdoors in all countries of
the European Community using the 2.4 GHz band: Channels 1 - 13,
except where noted below.