manualshive.com logo in svg

Advanced Instruments OsmoTECH XT, Руководство по обслуживанию

Поделиться
Скачать
Advanced Instruments OsmoTECH XT Скачать руководство пользователя страница 44

 

Chapter 6 

Maintenance and service

OsmoTECH XT Single-Sample Micro-Osmometer Service Guide

44

7. 

Inspect the solenoid plunger for excessive wear and 
deposits. 

• 

If the plunger shows signs of fouling (Figure 3), 
clean it with a lint-free cloth dampened with 
isopropyl alcohol or a cleaning solution for protein 
removal. (Thermo Scientific Orion Cleaning 
Solution, part number 900021 is recommended.) 

• 

If the plunger does 

not

 show signs of wear, 

continue to step 8.

Black 

deposits 

on shaft

Filings 

present

Plating is 

uneven, with a 

dull, hammered 

appearance

No black 

deposits 

on shaft

No filings 

present

Plating is 

even, bright, 

and shiny

8. 

Return the cleaned solenoid plunger, including 
spring, retainer and any washers, to the solenoid 
body. Screw in the retainer bracket screws. Replace 
the instrument cover, and remove the chamber 
cleaner.

9. 

If necessary, recalibrate the OsmoTECH XT.

Fuse replacement

Tools required:

• 

Small flat screwdriver

• 

Static Grounding Wrist Strap

WARNING:

 Hazardous Voltage

WARNING:

 Internal components may be 

damaged by static electricity.

CAUTION:

 Improper connections may cause 

damage to the instrument.

CAUTION: 

A discharge of static electricity from 

contact with the human body or other 

conductor may damage system boards or static 

sensitive devices. NEVER UNPACK, TOUCH OR 

HANDLE ANY PCB WITHOUT WEARING A 

GROUNDING (EARTHING) STRAP TO MINIMIZE 

YOUR STATIC DISCHARGE.

1. 

Power off the OsmoTECH XT.

2. 

Unplug the instrument and remove the power cord 
from the instrument.

3. 

Use a small flat screwdriver to open the Fuse Holder 
Door located on the Power Entry Module.

Screwdriver

Fuse Holder

Fuse Holder 

Door (open)

4. 

Remove the Fuse Holder; then remove the two fuses.

Содержание OsmoTECH XT





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды