Hybrid Standalone NVR User Guide
Region
Click the
Setup
button to set Motion Detection zone. There are 396(PAL)/330(NTSC) small zones.
The red zone is the motion detection zone; the clear zone is the disarmed zone. The system can only
detect motion detect signal from the armed region.
To set the Motion Detection Region:
1.
Click the
Setup
button. A single screen display appears with a grid and semi-transparent
overlay.
The red zone is the armed (motion detection) zone; the clear zone is the disarmed zone. The
system only detects motion in the red armed region. The default setup is the entire screen (all
red).
2.
Drag the mouse to set the motion detection zone. The selected area no longer shows the
overlay.
3.
Click
Save
.
Figure 4-43
Record Channel
Check the box to enable, and the click the buttons for the channels that you want recorded when the
event is triggered. The selected channels are highlighted.
Delay
To avoid rerecording the same event, enter the number of seconds to wait after the event has ended
before a new recording can begin. This value ranges from 10s to 300s.
Alarm Out
Check the box to enable the external alarm when the event triggers. In the boxes to the immediate
right, enable which camera(s) will record when the event occurs.
NVR4200 Series User Guide
163
