Hybrid Standalone NVR User Guide
4.
Use the arrow keys to move the camera to the desired view pattern, using the Zoom, Focus,
and Iris settings as needed. The pattern that the camera follows is recorded.
5.
Click the
End
button to terminate recording the pattern.
To activate the Pattern:
1.
In the main PTZ interface, enter the
Pattern
number you want to playback into the
No.
field,
using the numeric keypad.
Figure 3-71
2.
Click
to initiate the selected
Pattern. The camera moves to all the locations that were
recorded in the selected Pattern. Click
again to stop the Pattern.
Border
Border is the right and left limitations that you set for camera movement. Borders determine the
pattern limits for Auto Scan.
Figure 3-72
To setup the Borders:
1.
In the PTZ Control panel, select the
Border
tab.
2.
Use the arrow keys to move the camera to the desired left-most limit.
3.
Click the
Left
button. The Left limit is defined.
4.
Repeat steps 1-3, this time setting the Right side border.
NVR4200 Series User Guide
99
