Hybrid Standalone NVR User Guide
The PTZ Setup screen contains the following items:
Channel.
Use the drop-down list to select the desired channel number.
Make this channel
selection first.
PTZ Type:
Use the drop-down list to select Local mode if you are connecting to the Speed
dome (PTZ) via RS485 cable. Select Remote mode if you are connecting to a network PTZ
camera.
Protocol.
Select corresponding PTZ protocol (such as Pelco D)
Address:
Input corresponding PTZ address. The default address is 1.
Baud rate:
Select corresponding baud rate. The default value is 9600.
Data bits:
select corresponding data bits. The default value is 8.
Stop bits:
select corresponding stop bits. The default value is 1.
Parity:
Select from three options: odd, even or none. The default setup is none.
3.
After completing all the settings, click the
Save
button.
The system reverts to the previous menu.
3.6.4.3
PTZ Menu
In one window display mode, right mouse-click and select
Pan/Tilt/Zoom
from the Right-click menu,
or press the
Fn
button on either the front panel or on the remote.
Figure 3-61
NVR4200 Series User Guide
93
