6240B DC Voltage Current Source/Monitor Operation Manual
2.2.3 Menu Operation
2-30
1) Data Set ..
Random memory setting
* Press [SEL] to switch between address and data input.
Numeric
2) Save/Clear
Random memory clear (RAM)/
Random memory save (RAM
Flash)
Select Save/Clear and press [ENTER] to run.
Run
G) RANDOM MEM
(d)
Category level Select
level Input/Run
level
H) COMPUTE
Parameter
type
1) Compare SW
Comparator calculation
Off/On
Select
2) Scaling SW
Scaling calculation
Off/On
Select
3) Max/Min SW
MAX/MIN calculation
Off/On
Select
4) View Mx/Mn
Reading MAX/MIN calculation results
a) Sample
Number of measurement data
b) Maximum Maximum measurement value
c) Minimum
Minimum measurement value
d) Average
Measurement average value
e) Total
Total measurement value
* Use
,
or
to select a) to e).
Select
(c)
I) CONST
1) High Value
Comparator calculation upper-limit value
0 to
999.999E+24
Numeric
2) Low Value
Comparator calculation lower-limit value
0 to
999.999E+24
Numeric
3) SCL Val_A
Scaling calculation constant A
0 to
999.999E+24
0 (zero) is not available.
Numeric
4) SCL Val_B
Scaling calculation constant B
0 to
999.999E+24
Numeric
5) SCL Val_C
Scaling calculation constant C
0 to
999.999E+24
Numeric
6) Null Value
NULL calculation constant
0 to
999.999E+24
Can be selected/changed only when NULL calculation is
ON.
Numeric
