6240B DC Voltage Current Source/Monitor Operation Manual
2.2.6 Pulse Measurement
2-39
Preparation
1. Follow the same procedure described in Section 2.2.5, "DC Measurement."
Setting the pulse source value
2. Press
123…
,
2
,
UNIT
, and
ENTER
in order.
The pulse source value is set to 2 V.
Setting the current limit value
3. Press
123…
,
3
,
UNIT
and
ENTER
in order.
The current limit value is set to ±3 mA.
4. Press
LIMIT
.
The HOME screen is displayed.
Setting the base value
5. Press
MENU
.
6. Press
or
to select
A) SOURCE
. Press
to enter the Select level.
7. After confirming the parameter is
1) PLS Base
, press
to enter the Input/Run
level, and press
123…
,
1
,
UNIT
, and
ENTER
in order.
The base value is set to 1 V.
Setting the pulse time
8. Press
,
,
,
and
in this order to select
D) TIME
.
9. Press
and
to select
2) Src Delay
. Press
to enter the Input/Run level.
10. Press
123..., 1,
and
ENTER
in order.
Tds is set to 1 ms.
