2-4
Adaptec ATA RAID 1200A Installation and User’s Guide
Connecting the LED Activity Indicator
(Optional)
An LED on the front panel of most computers lights to indicate
activity on your hard disks. If you want the LED to light whenever
there is activity on hard disks connected to the Adaptec ATA RAID
1200A card, you must disconnect the LED cable from the
motherboard and connect it to the LED connector on the Adaptec
ATA RAID 1200A as shown in
Figure 2-3
.
Note:
If you connect the LED cable to the Adaptec ATA RAID
1200A card,the LED lights whenever there is activity on
hard disks connected to the Adaptec ATA RAID 1200A card
only. The LED will no longer light whenever there is activity
on hard disks not connected to the Adaptec ATA RAID
1200A card.
Note:
When connecting the LED cable to the Adaptec ATA
RAID 1200A card, make sure you connect the red (or
colored) part of the cable to the top portion of the LED
connection (plus), and the black part of the cable to the
bottom portion (minus).
Figure 2-3 Connecting the LED Activity Indicator
ATA RAID 1200A IUG.book Page 4 Wednesday, November 13, 2002 2:22 PM
