5-9
Using the Adaptec ATA RAID Management Software
5
Click Create. The following message appears:
All data on the selected disks will be deleted! Are you sure you
want to continue?
Click Yes to continue.
6
You will get a confirmation message notifying you that the
RAID you specified has been created successfully. You will be
prompted to restart your system. Click Yes to restart. After you
have restarted your system, your Main menu will display your
built arrays.
Warning:
If you have created an array and tried to use it
without first restarting, you can get possible data corruption.
Create RAID 1 (Mirroring)
To create a RAID 1 array, follow these steps:
1
From the Main menu Menu bar, select
Configuration>Create>RAID 1 (Mirroring)
or, from the Main menu toolbar, select RAID 1.
ATA RAID 1200A IUG.book Page 9 Wednesday, November 13, 2002 2:22 PM
