5-8
Adaptec ATA RAID 1200A Installation and User’s Guide
Create RAID 0 (Striping)
To create a RAID 0 array, follow these steps:
1
From the Main menu Menu bar, select
Configuration>Create>RAID 0 (Striping)
or, from the Main menu toolbar, select RAID 0.
2
From the Available Disks screen, select the disk and click Add,
then click Next.
Note:
You must have at least two hard disk drives to create an
array.
3
Select the Block size from the Block Size screen, then click Next
(see
Figure 5-9
).
Figure 5-9 Block Size Menu
4
Specify an array name of eight characters or less. If you don’t
specify an array name, one will be automatically created.
ATA RAID 1200A IUG.book Page 8 Wednesday, November 13, 2002 2:22 PM
