4-8
Adaptec ATA RAID 1200A Installation and User’s Guide
Installing the Driver When Windows NT 4.0 is Already Installed
To update or install the Adaptec ATA RAID 1200A driver if
Windows NT is already installed, follow these steps:
1
Start Windows NT.
2
Click the Start button on the Windows NT task bar, then select
Settings
.
3
From the Settings menu, select Control Panel.
4
From the Control Panel, select the SCSI Adapters icon.
5
From the SCSI Adapters window, select the Drivers tab.
6
From the Drivers window, select Add.
7
Select Have Disk.
8
Insert the Adaptec ATA RAID 1200A driver disk into your
floppy disk drive and press Enter. Enter the following path to
the installation files, then click OK.
a:\win_nt
9
In the Install Driver window, click OK.
10
On the SCSI Adapters window, click OK. The driver is now
installed and started.
ATA RAID 1200A IUG.book Page 8 Wednesday, November 13, 2002 2:22 PM
