4-10
Adaptec ATA RAID 1200A Installation and User’s Guide
Installing the Driver When Windows XP is Already Installed
To install the Adaptec ATA RAID 1200A driver if Windows XP is
already installed, follow these steps:
1
Start Windows XP.
Windows XP will automatically discover the new hardware and
start the Found New Hardware Wizard to guide you through
the device driver installation.
2
Select the option, Install from a list or specific location
(Advanced)
, then select Next.
3
Select the option, Don’t search, I will choose the driver to
install
, then click Next.
4
Click Have Disk button.
5
Insert the Adaptec ATA RAID 1200A floppy disk into the
floppy disk drive. Type the following path as the location, click
OK
, then Next:
A:\win_xp
6
Follow the on-screen prompts to complete the installation.
7
After completing the installation, select Finish.
8
You will be prompted to restart the computer. Select Yes.
9
The new hardware Adaptec RCM device is also detected. The
drivers are automatically loaded for that device and when it
completes, the installation of the driver is complete.
ATA RAID 1200A IUG.book Page 10 Wednesday, November 13, 2002 2:22 PM
