2-9
Installing the Hardware
2
Connect the black connector of the ATA/100 cable to a master
drive. If you have not already set up your drives, refer to
Setting
up ATA Hard Disk Drives on page 2-5
before continuing.
Figure 2-7 Connecting an ATA Drive
3
If you are connecting only two hard disk drives, connect the
blue connector of the second ATA/100 cable to the channel 2
connector on the controller card, just as you did in
Step 1
. Now
that you have finished connecting both drives, your hardware
installation is complete; do not continue to the next step.
Figure 2-8 Connecting Two ATA Drives
ATA RAID 1200A IUG.book Page 9 Wednesday, November 13, 2002 2:22 PM
