4-6
Adaptec ATA RAID 1200A Installation and User’s Guide
4
Insert the Adaptec ATA RAID 1200A driver floppy disk into the
floppy disk drive and press Enter.
5
You will be presented with a selection of driver options. Using
the arrow keys, select the following driver and press Enter:
Adaptec ATA RAID 1200A Controller for Win2000
If you have no other controllers to add, press Enter to continue
with the Windows 2000 installation.
Installing the Driver When Windows 2000 is Already Installed
To install the Adaptec ATA RAID 1200A driver if Windows 2000 is
already installed, follow these steps:
1
Start Windows 2000.
Windows 2000 will automatically discover the new hardware
and start the Found New Hardware Wizard to guide you
through the device driver installation.
2
At the Welcome to the Found New Hardware Wizard window,
select Next.
3
On the Install Hardware Device Drivers
screen, select search for
a suitable driver for my device
and click Next.
4
On the Locate File screen, select Floppy Disk Drives and insert
the Adaptec ATA RAID 1200A floppy disk into the floppy disk
drive. Click Next.
5
On the
the wizard found a driver
screen, click Next.
6
At the Completing the Found New Hardware Wizard window,
select Finish.
7
The Adaptec RCM device is detected and the driver is
automatically loaded. Installation is now complete.
ATA RAID 1200A IUG.book Page 6 Wednesday, November 13, 2002 2:22 PM
