2-3
Installing the Hardware
4
Insert the Adaptec ATA RAID 1200A card in the PCI expansion
slot; press down firmly until it clicks into place, then replace the
slot cover screw as shown in
Figure 2-2
.
Note:
f you are using this Adaptec ATA RAID 1200A card
with a SCSI controller in the same system and you want to
make the ATA card bootable, install it at the lowest BIOS
address. Check your system documentation to determine
which slot is at the lowest address. (Usually it is PCI slot 1 at
the top for motherboards without AGP slot, and PCI slot 2,
second next to the AGP slot, for motherboards with AGP
slot.
Figure 2-2 Installing the Adaptec ATA RAID 1200A in a PCI Expansion
Slot
ATA RAID 1200A IUG.book Page 3 Wednesday, November 13, 2002 2:22 PM
