3-1
3
Using the BIOS Array
Configuration Utility
In this Chapter
Introduction
The Adaptec ATA RAID 1200A card has an on-board BIOS Array
Configuration Utility which allows you to create a bootable array
on your hard disk drives.
Before you can use your BIOS Array Configuration Utility, make
sure you have done the following:
1
Installed the Adaptec ATA RAID 1200A card into a valid PCI
slot.
2
Attached the hard disk drives.
3
Reinstalled the computer cover and connected all power cables.
4
Powered-on your system.
Introduction
3-1
Create Array
3-2
Delete Array
3-6
Create/Delete Spare
3-6
Select Boot Disk
3-7
ATA RAID 1200A IUG.book Page 1 Wednesday, November 13, 2002 2:22 PM
