4-3
Installing the Device Driver
10
You will get this message:
Windows is now ready to install the best driver for this device...
Click Next.
11
After completing the installation, select Finish.
12
You will be prompted to restart the computer. Select Yes.
Installing the Driver When Windows 98 is Already Installed
To install the Adaptec ATA RAID 1200A driver if Windows 98 is
already installed, follow these steps:
1
Start Windows 98.
Windows 98 will automatically discover the new hardware and
start the Found New Hardware Wizard to guide you through
the device driver installation.
2
On the Add New Hardware Wizard window, select Next.
3
Select Search for the best driver for your device and click Next.
4
On the
Windows will now search for new drivers
screen, make
sure only a checkmark appears next to Specify Location. Insert
the Adaptec ATA RAID 1200A floppy disk into the floppy disk
drive. Type the following path as the location, then click Next:
a:\win98_me
5
The following message appears:
Windows is now ready to install the best driver for this device...
Click Next.
6
After completing the installation, select Finish.
7
The Adaptec RCM device is detected and the driver is
automatically loaded. Installation is now complete.
ATA RAID 1200A IUG.book Page 3 Wednesday, November 13, 2002 2:22 PM
