81
Note that after receiving a DTMF ‘5’ the radio alarm panel will go on to
call any other programmed speech dialler numbers. To prevent calls to
other programmed speech dialler numbers the called party can
acknowledge a call by sending back a DTMF ‘9’. When the radio alarm
panel receives the ‘9’ it stops all further call attempts.
10.10.3.8. Social Care call with speech message
If you receive an alarm call with a speech message it may take several
seconds until you hear the message. After the message has been
played you can listen into the room.
Select DTMF for the audio connection. An alarm call needs to be
acknowledged by pressing the button 5 or 9 on the telephone
Speaking
DTMF tone “2”
Listening
DTMF tone “1”
Switching
DTMF tone “*”
Confirm call
DTMF tone “5”
Play back basic message
DTMF tone “3”
Confirm all calls
DTMF tone “9”
10.10.4. SMS
In addition to alarm transmission by digital report or voice text, the
panel can also send an event by SMS.
The radio alarm panel can send alarm reports by SMS message to
any of four telephone numbers. Each alarm report is a single SMS
message, comprising:
A Home Message and a text message. You must program the radio
alarm panel with the content of these messages.
The text of the log entry that corresponds to the event causing the
alarm.
The time and date of the alarm.
The zone name of the zone causing the alarm.
Use the control buttons
to select
SMS
.
Confirm your selection by
pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
If you confirm
SMS
with the
Select
button, you see the following graphic
display:
Use the control buttons
to select a
function
. For a list of functions
and their attributes, see the table below. Confirm your selection by
pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
