68
10.10.1.10. SIA Report Restorials
Use the control buttons
to select
SIA Restorials
.
Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
SIA Report Restorials
with the
Select
button, you see the
following graphic display:
Use the control buttons
to select whether the restoring of a
function (closing of an alarm zone, error clearance) is to be transmitted
to the station. If this function is disabled, only faults or alarms are
transmitted to the panel but not the restoring (OK message) of this
function. Select a function by pressing the control button
under
the word
Select
.
To cancel input, press the control button
under
the word
Back.
10.10.1.11. Contact ID
Use the control buttons
to select
Contact ID
.
Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Contact ID
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select whether the restoring of a
function (closing of an alarm zone, error clearance) is to be transmitted
to the station. If only the basic function is enabled, only faults or alarms
are transmitted to the panel but not the restoring (reset) of this function.
Select a function by pressing the control button
under the word
Select
.
To cancel input, press the control button
under the word
Back.
Table lists all messages transmitted . If you select
Basic
, all messages are
transmitted.
If you select
Basic+Restore
, all messages with a number are
transmitted.
