8
6. Notes on security system
6.1 Opening the panel casing
Install the alarm panel in the order described here.
First remove the two screws on the base of the radio alarm panel as
shown here.
Open up the top part (1) of the radio alarm panel and separate the
base plate (2) from the rest of the station. Take particular note of the
cable connections.
6.2 Connections in the upper part
The following figure shows the connections in the upper part.
Number
Description
1
Internal siren
2
Battery case
3
Internal loudspeaker
4
Connection for analogue telephone
5
Kickstart and code reset jumper (KS + RESET)
6
Connector for external loudspeaker and microphone
(separate device)
7
Connector for extension modules (ISDN/GSM module)
8
Connecting cable between base plate and upper part
9
Loudspeaker volume control
10
USB port
(1)
(2)
