43
10.7.1. Configuring user options
Press the control button
to select
User Options
and confirm by
pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
After selecting
User Options
with
Select
, you see the following graphic
display:
With the control buttons
select user options according tot he
table below. To release a function for the user, press the control button
under the word
Change
. The option must be set to
Y
to be used
by the user.
To end input, press the control button
under the word
Done
.
Function
Meaning
Record memo
Enables the user to record a voice message.
Reset after alarm
Enables the user to reset the radio alarm panel
following an alarm.
If you wish to allow users
to reset the system after an alarm then select
“Y”. If you wish to make sure that only the
Installer can reset the system after an alarm
then select “N”.
Dual key function
Activates the alarm buttons on the keypad.
Zone tamper reset
Enables the user to reset the radio alarm panel
with the user code following a tamper alarm.
If
you wish to allow users to reset the system
after an alarm then select “Y”. If you wish to
make sure that only the Installer can reset
the system after an alarm then select “N”.
All omit
Enables the user to lock all open zones with a
single button.
Social care button
Activates the Social Care button on the
keypad.
Quick set
Enables the activation of the panel without a
user code.
