65
Medical
Open (see note 1)
Close (see note 1)
Zone Omitted (Channel 5. see note 2)
Burg Partition 1
Burg Partition 2
Burg Partition 3
Burg Partition 4
Alarm Confirmation (required for DD243)
Alarm Abort
Notes:1. Open and Close provide the same functions as Open/Close,
but on two separate channels.
2. Zone Omitted - the radio alarm panel sends this signal when a
user omits a zone. (Required for DD243.)
3. The radio alarm panel delays reporting/logging either mains loss,
or exiting Installer Menu with mains loss, by 15-18 min (chosen
randomly). For Scandinavia the radio alarm panel waits at least 60
minutes before reporting.
Specify the alarm to be transmitted on this channel. The channels are
preset as follows:
Channel
Setting
1
Fire
2
Panic
3
Intrusion
4
Enabled/disabled
5
Not used
6
Not used
7
Not used
8
Technical alarm
10.10.1.8. Fast Format Restore
Use the control buttons
to select
Fast Format Restore
.
Confirm
your selection by pressing the control button
under the word
Select
. To cancel input, press the control button
under the word
Back
.
If you confirm
Fast Format Restore
with the
Select
button, you see the
following graphic display:
Use the control buttons
to select whether the restoring of a
function (closing of an alarm zone, error clearance) is to be transmitted
to the station. If the function is disabled, only faults or alarms are
transmitted to the panel but not the restoring of this function. Select a
function and then press the control button
under the word
Select
.
To cancel input, press the control button
under the word
Back.
