32
After selecting
Edit Ext Siren
, you see the following graphic display:
Use the control buttons
to select a partition. Change the setting
by pressing the control button
under the word
Change
. To end
input, press the control button
under the word
Done
.
If you want the siren to be activated when the partition triggers a local
or external alarm, it must be set to
Yes
.
In the same way, train further external radio sirens and configure them
accordingly.
IMPORTANT:
To train a siren connected via the Wireless Accessory
Module (WAM), read the section “Wireless Accessory
Module”. This section only describes training sirens that
need no Wireless Accessory Module to control them.
10.5.2 Info module
10.5.2.1 Teach Info module
If you confirm
Info Module
with
Select
, you see the following graphic
display:
Use the control buttons
to select the option Teach Info Module.
Confirm your selection by pressing the control button
under the
word
Select
. To cancel input, press the control button
under the
word
Back
. If you confirm your selection, you see the following graphic
display:
Switch the info module(s) to learn mode. See the product instructions
for advice on this. After switching the info module(s) to learn mode,
activate the sending of radio information by the panel by pressing the
control button
under the word
Teach
. To cancel input, press the
control button
under the word
Back
.
