36
10.5.3.3 WAM as transmitter/receiver technology module
Analogue to the WAM as output module, the WAM as
transmitter/receiver technology module configures the 4 outputs. In
addition to the outputs, two radio inputs are reserved. These have to
be configured according to the function as connected in the WAM.
Read the operating instructions of the WAM. The selected radio zone is
being displayed (UVM1 – radio zones 32, UVM2 – radio zone 31… UVM8
– radio zones 25).
10.5.3.4 WAM as siren module
After configuring the WAM as siren module, you see a display in which
you have to define the partition for which the siren is to be activated.
Make this setting as for the external siren. To connect the compact
alarm device to the WAM, see the WAM operating instructions.
10.5.4 Arming station
If you confirm
Arming station
with
Select
, you see the following graphic
display:
Press the control button
to select
ADD/DEL Arming Stat.
and
confirm by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
You see the following graphic display:
Select an arming station and confirm your selection by pressing the
control button
under the word
Select
. Up to 4 arming stations can
be programmed. Now trigger the tamper contact of the arming station
(see the operating instructions of the arming station) When the arming
station has been programmed, the radio alarm panel beeps twice to
acknowledge. At the same time, the graphic display shows the
symbol next to the arming station’s number. Now select
EDIT arming
station
.
