51
10.7.15. Siren in Part Set
Use the control buttons
to select
Siren in PSet
.
Confirm your
selection by pressing the control button
under the word
Select
. To
cancel input, press the control button
under the word
Back
.
If you confirm
Siren in Part Set
with the
Select
button, you see the
following graphic display:
Use the control buttons
to select Enabled and the alarm system
will also create a local alarm when the system is part set. If this function
is deactivated the panel will only start the internal sounder. The
transmission via dialler to a monitoring station (optional) will be
executed in any case. To select a function, press the control button
under the word
Select
.
To cancel input, press the control button
under the word
Back.
10.7.16. Force Set
Use the control buttons
to select
Force Set
.
Confirm your selection
by pressing the control button
under the word
Select
. To cancel
input, press the control button
under the word
Back
.
If you confirm
Force Set
with the
Select
button, you see the following
graphic display:
Use the control buttons
to select the option On. All zones with the
zone attributes “F” will be automatically omitted when the zones are
open and the panel or a partition is set.
Use the control buttons
to select the option Confirm. All zones with
the zone attributes “F” will be automatically omitted when the zones
are open and the panel or a partition is set. To set the system or a
partition you have to confirm the setting. This is done by pressing the set
button on the remote control twice. Don’t use this force setting option if
you use the wireless cylinder.
Use the control buttons
to select the option Off. Now it is no more
possible to set the system or a partition if at least one zone is open,
even though the zone has been programmed with the attribute “F”.
To select a function, press the control button
under the word
Select
.
To cancel input, press the control button
under the word
Back.
Note: If you enable “Force Set” then the system does not comply with
EN50131.
