manualshive.com logo in svg

abi 7500, Руководство по началу работы

Поделиться
Скачать
abi 7500 Скачать руководство пользователя страница 18

Preface

General Instrument Safety

Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve

and Comparative C

T

 Experiments

xvi

General Instrument Safety

PHYSICAL INJURY HAZARD. 

Use this product only as 

specified in this document. Using this instrument in a manner not specified by 
Applied Biosystems may result in personal injury or damage to the instrument.

Moving and

Lifting the

Instrument

PHYSICAL INJURY HAZARD. 

The instrument is to be moved 

and positioned only by the personnel or vendor specified in the applicable site 
preparation guide. If you decide to lift or move the instrument after it has been installed, 
do not attempt to lift or move the instrument without the assistance of others, the use of 
appropriate moving equipment, and proper lifting techniques. Improper lifting can cause 
painful and permanent back injury. Depending on the weight, moving or lifting an 
instrument may require two or more persons.

Moving and

Lifting Stand-

Alone Computers

and Monitors

Do not attempt to lift or move the computer or the monitor without 

the assistance of others. Depending on the weight of the computer and/or the monitor, 
moving them may require two or more people.

Things to consider before lifting the computer and/or the monitor:

• Make sure that you have a secure, comfortable grip on the computer or the monitor 

when lifting.

• Make sure that the path from where the object is to where it is being moved is clear 

of obstructions.

• Do not lift an object and twist your torso at the same time.

• Keep your spine in a good neutral position while lifting with your legs.

• Participants should coordinate lift and move intentions with each other before 

lifting and carrying.

• Instead of lifting the object from the packing box, carefully tilt the box on its side 

and hold it stationary while someone slides the contents out of the box.

Operating the

Instrument

Ensure that anyone who operates the instrument has:

• Received instructions in both general safety practices for laboratories and specific 

safety practices for the instrument.

• Read and understood all applicable Material Safety Data Sheets (MSDSs). See 

“About MSDSs” on page xvii.

PHYSICAL INJURY HAZARD. 

Use this instrument as specified 

by Applied Biosystems. Using this instrument in a manner not specified by 
Applied Biosystems may result in personal injury or damage to the instrument.

Cleaning or

Decontaminating

the Instrument

Before using a cleaning or decontamination method other than those 

recommended by the manufacturer, verify with the manufacturer that the proposed 
method will not damage the equipment

.

Содержание 7500





































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды