ABB LD 800HSE, Руководство пользователя

Страница: 80 / 136

System Status Section 4 Linking Device Diagnostics
80 3BDD011677-600 A
Table 14. System Status
PD Tag Physical Device tag: a unique, configurable and system-
dependent name for the device (left blank in
Figure 25 )
Device Id Unique device identifier assigned by the manufacturer;
used for unique identification of the device; contains serial
number with 22 characters, manufacturer identifier and
device type
(here: manufacturer identifier ‘000320’ for “ABB”, device
type ‘0067’ for “LD 800HSE” and serial number as
‘LD800HSE00000023000082’
(1)
as shown in Figure 25 ).
IP Address IP address of the linking device
IP Address
(redundant device) IP address of the redundant linking device; this is empty, if
the linking device operates in non-redundant mode.
Subnet Mask IP subnet mask
Broadcast IP broadcast address used to send a message to all sta-
tions in a subnetwork
Default Gateway Address of the IP gateway to other subnets
Operating State Current operating state of the linking device; the following
states are possible:
• ok
• failure: no serial communication
• failure: TCP link to redundant device is lost