ABB LD 800HSE, Руководство пользователя

Страница: 36 / 136

Display Elements Section 2 Hardware Installation
36 3BDD011677-600 A
F red Primary Device or non-redundant device, hardware failure.
The device is acting as Primary Device in a redundant set or as
non-redundant device, but a minor hardware failure has been
detected during start-up. Details are available on the web page
/Information/Hardware Diagnostics of the device, refer to
Hardware Diagnostics on page 86.
In the case of a Primary Device in a redundant set, the
Secondary Device is not ready.
R green
F red Secondary Device, hardware failure.
The device is acting as Secondary Device in a redundant set, but
a hardware failure has been detected. Details are available on
the web page /Information/Hardware Diagnostics of the
device, refer to
Hardware Diagnostics on page 86.
OR
Inactive device, duplicate H1 address.
The device is inactive on HSE and affected H1 links, because a
device with the H1 address of the linking device has been
detected on at least one H1 link during startup.
If the device is part of a redundant set, this state may be caused
by interruption of the serial communication between the two
linking devices during startup. After the serial communication is
reestablished, the device with the duplicate H1 address error will
reboot and receive configuration data from the Primary Device.
R
Table 6. Device Status Indication with Single-colored LEDs
Display
Element
Description