ABB LD 800HSE, Руководство пользователя

Страница: 66 / 136

Login to Web Server Interface Section 3 Configuration
66 3BDD011677-600 A
1. Click the Browse button on the Firmware Update page to open a file selector
box.
2. Select the firmware file to be downloaded.
3. It is recommended to erase the configuration part of the flash memory by
checking Erase Linking Device Configuration. This will clear the FF
configuration information (plant configuration), but the IP configuration will
not be changed.
4. Click Download Firmware and Reboot to start the download process.
Firmware download and flash memory update take between one and two
minutes. You can observe the progress of the update process in the browser
window.
5. The successful completion of the update process is indicated by the message
SUCCESS, see
Figure 21 .
If you erase the linking device configuration, the password will be reset to its
default value, which is an empty string. If this occurs, the password must be
changed from the default value.
During Reboot, the IP connection between PC and linking device will be lost.
After the SUCCESS message is displayed, do not power down the linking device
before the H1 link LEDs have lit up at least once OR or at least 60 seconds have
elapsed.
Do not access the web server of the linking device before the SUCCESS message
is displayed in the browser window. If you do so, you will have to clear the cache
of your web browser after the boot process has finished, and then re-establish a
connection to the web server of the linking device.