ABB LD 800HSE, Руководство пользователя

Страница: 35 / 136

Section 2 Hardware Installation Display Elements
3BDD011677-600 A 35
F Start-up phase (approx. 25 seconds).
During this phase the power-on self tests are executed and the
redundancy role is determined.
OR
Secondary Device, not ready.
The device is acting as Secondary Device in a redundant set, but
it is not ready to take over the primary role due to e. g. not
synchronized configuration information or a non-operational
redundancy link.
OR
Primary Device or non-redundant device, failure.
The device is acting as Primary Device in a redundant set or as
non-redundant device, but a failure has been detected.
In the case of a Primary Device in a redundant set, the
Secondary Device is not ready.
R
F red Permanent hardware fault detected during startup.
A fatal error has been detected during power-on self tests, refer
to
Power-on Self Tests on page 75.
R
F Non-redundant device, ready.
The device is operational; it is not part of a redundant set.
OR
Primary Device in redundant set.
The device is operational, acting as Primary Device in a
redundant set. The Secondary Device is ready.
R green
Table 6. Device Status Indication with Single-colored LEDs
Display
Element
Description