ABB LD 800HSE, Руководство пользователя

Страница: 40 / 136

Display Elements Section 2 Hardware Installation
40 3BDD011677-600 A
Device Status Indication (Two-colored F- and R-LEDs)
Table 8. Device Status Indication with Two-colored F- and R-LEDs
Display
Element
Description
P P - Power Supply
No supply voltage.
green Supply voltage is present.
HSE HSE - Ethernet Port
No Ethernet link established.
green Ethernet link has been established
(10 Mbit/s or 100 Mbit/s).
green Device is transmitting Ethernet frames.
F / R F - Error Status / R - Ready for Operation
F Initial boot phase (approx. 7 seconds).
During this phase the boot process may be stopped via the serial
interface.
R green
F Start-up phase (approx. 25 seconds).
During this phase the power-on self tests are executed and the
redundancy role is determined.
R
F red Permanent hardware fault detected during startup.
A fatal error has been detected during power-on self tests, refer
to
Power-on Self Tests on page 75.
R
F Non-redundant device, ready.
The device is operational; it is not part of a redundant set.
R green
F green Primary Device in redundant set.
The device is operational, acting as Primary Device in a
redundant set. The Secondary Device is ready.
R green