KNX Technical Reference Manual
ABB i-Bus
®
KNX Yucus
75
NOTE:
If the digital label is currently serving as an orientation light, it will not blink.
This also applies if during the flashing it is switch to orientation lighting, i.e. the digital
label stops flashing immediately.
The digital label will flash if an ON telegram is receive on the 1-bit communication object
"Alarm". If the object receives an OFF telegram, the digital label will no longer flash.
The digital label always flashes in the same colour and brightness that was specified via
the status function or function display.
The alarm function could be used to display a wind alarm to the user, for example, so that
the user knows that no blind operation is possible at that time. An additional application
would be the signaling of an open door when user would like to lower a roller blind.
12.23.12
Objects no
Object name
Data type
Flags
Label status
1 Bit DPT 1.001
C, W, U
Label status
1 byte DPT 5.001
C, W, U
Visual ON/OFF object
1 Bit DPT 1.001
C, W, U
Alarm
1 Bit DPT 1.005
C, W, U
Scene storage
1 Byte DPT 18.001
C, W, U
12.24
Application “Common Functions - Telegram cyclic”
Via the "Telegram cyclic" application and after receipt of a telegram on the "Input" object,
a telegram with the same volume is cyclically sent out on the "Cyclic output" object. The
object types for "Input" and "Output" can be collectively parameterized for the different
applications. The times for cyclic sending on the "Output" object are adjustable. Via an
additional "Enable" object, there is the option of temporarily blocking the function.
12.24.1
Channel – Object type
Options
1 bit switching
1 bit alarm
1 byte 0 - 100%
1 byte (0 - 255)
2-byte float
2-byte signed
2-byte unsigned
2-byte temperature
4-byte float
4-byte signed
4-byte unsigned
The object types for "Input" and "Output" can be collectively parameterized for the
different application cases. The following sizes can be selected:
