ABB FlexLoader SC 6000, Руководство по эксплуатации продукта, Страница: 189 / 284

Parameters
View and change parameters
Display Action Step
Go to the main menu by pressing if
you are in the output mode, otherwise by
pressing
repeatedly until the display
shows MENU at the bottom.
1
If the panel is not in the parameter mode
(
PAr not visible), press or until
you see PAr and then press . The dis-
play shows the number of one of the para-
meter groups.
2
Use keys and to find the desired
parameter group.
3
Press . The display shows one of the
parameters in the selected group.
4
Use and to find the desired
parameter.
5
Press and hold for about two seconds
until the display shows the value of the
parameter with
underneath. This indic-
ates that you can now change the value of
the parameter.
Note: When is visible, pressing
and simultaneously changes the dis-
played value to the default value of the
parameter.
6
Use and to modify the parameter
value. When you have changed the paramet-
er value,
starts flashing.
To save the displayed parameter value,
press .
To cancel the new value and keep the origin-
al, press
.
7
Default parameter settings
The following default parameter settings are used for frequency converters (e.g.
U11 and U12).
Value Setting Description Parameter number
0 ENGLISH LANGUAGE 9901
3 ALTERNATE APPLIC MACRO 9902
1 AM MOTOR TYPE 9903
Continues on next page
Product manual - FlexLoader SC 6000 189
3HAC051768-001 Revision: D
© Copyright 2014-2020 ABB. All rights reserved.
E Frequency inverter
Continued