ABB ACSM1 Series, Руководство по прошивке

Страница: 14 / 334

Introduction to the manual
14
Contents
The manual consists of the following chapters:
• Start-up instructs in setting up the control program and how to control the drive
through the I/O interface.
• Drive programming using PC tools introduces programming via PC tool
(DriveStudio and/or DriveSPC).
• Drive control and features describes the control locations and operation modes of
the drive, and the features of the application program.
• Default connections of the control unit presents the default connections of the
JCU Control Unit.
• Parameters and firmware blocks describes the drive parameters and firmware
function blocks.
• Parameter data contains more information on the parameters of the drive.
• Fault tracing lists the warning and fault messages with the possible causes and
remedies.
• Standard function blocks
• Application program template
• Control chain block diagrams
• Appendix A – Fieldbus control describes the communication between the drive
and a fieldbus.
• Appendix B – Drive-to-drive link describes the communication between drives
connected together by the drive-to-drive link.
Product and service inquiries
Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to
www.abb.com/drives and
selecting Drives – Sales, Support and Service network .
Product training
For information on ABB product training, navigate to www.abb.com/drives and select
Drives – Training courses .
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to www.abb.com/drives and select
Document Library – Manuals feedback form (LV AC drives) .