ABB ACSM1 Series, Руководство по прошивке

Страница: 83 / 334

Parameters and firmware blocks
83
(1) INPUT DIO1 is used as a digital input.
12.02 DIO2 CONF FW block: DIO2 (see above)
Selects whether DIO2 is used as a digital input, as a digital output or as a frequency input.
(0) OUTPUT DIO2 is used as a digital output.
(1) INPUT DIO2 is used as a digital input.
(2) FREQ INPUT DIO2 is used as a frequency input.
12.03 DIO3 CONF FW block: DIO3 (see above)
Selects whether DIO3 is used as a digital input, as a digital output or as a frequency output.
(0) OUTPUT DIO2 is used as a digital output.
(1) INPUT DIO2 is used as a digital input.
(2) FREQ OUTPUT DIO2 is used as a frequency output.
12.04 DIO1 OUT PTR FW block: DIO1 (see above)
Selects a drive signal to be connected to digital output DIO1 (when 12.01 DIO1 CONF is set to (0)
OUTPUT ).
Bit pointer: Group, index and bit
12.05 DIO2 OUT PTR FW block: DIO2 (see above)
Selects a drive signal to be connected to digital output DIO2 (when 12.02 DIO2 CONF is set to (0)
OUTPUT ).
Bit pointer: Group, index and bit
12.06 DIO3 OUT PTR FW block: DIO3 (see above)
Selects a drive signal to be connected to digital output DIO3 (when 12.03 DIO3 CONF is set to (0)
OUTPUT ).
Bit pointer: Group, index and bit
12.07 DIO3 F OUT PTR FW block: DIO3 (see above)
Selects a drive signal to be connected to frequency output (when 12.03 DIO3 CONF is set to (2)
FREQ OUTPUT ).
Value pointer: Group and index
12.08 DIO3 F MAX FW block: DIO3 (see above)
Defines the maximum value for frequency output (when 12.03 DIO3 CONF is set to (2) FREQ
OUTPUT ).
3…32768 Hz Maximum DIO3 output frequency.