ABB ACSM1 Series, Руководство по прошивке

Страница: 82 / 334

Parameters and firmware blocks
82
Group 12 DIGITAL IO
Settings for the digital inputs and outputs, and the relay output.
12
12 DIGITAL IO
Firmware block:
DIO1
(6)
Selects whether DIO1 is used as a
digital input or as a digital output and
connects an actual signal to the
digital output. The block also shows
the DIO status.
Block outputs located in other
parameter groups 2.03 DIO STATUS (page 57 )
Firmware block:
DIO2
(7)
Selects whether DIO2 is used as a
digital or frequency input or as a
digital output and connects an actual
signal to the digital output. The block
also shows the DIO status.
Frequency input can be scaled with
standard function blocks. See chapter
Standard function blocks .
Block outputs located in other
parameter groups 2.03 DIO STATUS (page 57 )
2.10 DIO2 FREQ IN (page 57 )
Firmware block:
DIO3
(8)
Selects whether DIO3 is used as a
digital input or as a digital/frequency
output, connects an actual signal to
the digital/frequency output and
scales the frequency output. The
block also shows the DIO status.
Block outputs located in other
parameter groups 2.03 DIO STATUS (page 57 )
2.11 DIO3 FREQ OUT (page 57 )
12.01 DIO1 CONF FW block: DIO1 (see above)
Selects whether DIO1 is used as a digital input or as a digital output.
(0) OUTPUT DIO1 is used as a digital output.
DIO1
18
TLF7 2 msec (3)
12.01 DIO1 CONF
[ Output ]
< 12.04 DIO1 OUT PTR
[ STATUS WORD 2.2 ]
(4 / 6.02.READ Y RELAY)
2.03 DIO STATUS
2.03
Bit 0
DIO2
19
TLF7 2 msec (4)
12.02 DIO2 CONF
[ Output ]
< 12.05 DIO2 OUT PTR
[ STATUS WORD 2.3 ]
(4 / 6.02.MODULATING)
12.14 DIO2 F MAX
[ 1000 Hz ]
12.15 DIO2 F MIN
[ 3 Hz ]
12.16 DIO2 F MAX SCALE
[ 1500 ]
12.17 DIO2 F MIN SCALE
[ 0 ]
2.03 DIO STATUS
2.03
Bit 1
2.10 DIO2 FREQ IN
DIO3
20
TLF7 2 msec (5)
12.03 DIO3 CONF
[ Output ]
< 12.06 DIO3 OUT PTR
[ STATUS WORD 1.10 ]
(4 / 6.01.FAULT)
< 12.07 DIO3 F OUT PTR
[ SPEED ACT ]
(7 / 1.01)
12.08 DIO3 F MAX
[ 1000 Hz ]
12.09 DIO3 F MIN
[ 3 Hz ]
12.10 DIO3 F MAX SCALE
[ 1500 ]
12.11 DIO3 F MIN SCALE
[ 0 ]
2.03 DIO STATUS
2.03
Bit 2
2.11 DIO3 FREQ OUT