56
ACH580 Installation, Operation and Maintenance Manual
ACH580-01 Installation
8
Check AI1 scaling, see parameters
12.19
AI1 scaled at
AI1 min
and
12.20
AI1 scaled at AI1 max
.
9
Select the type of ID run you want to do and press
(
Select
) (or
).
10
Check the motor limits shown on the panel. If you need
other limits during the ID run you can enter them here.
The originals limits will be restored after the ID run,
unless you select
Set values as permanent
.
11
Press the Hand key (
) to start the ID run.
In general, it is recommended not to press any control
panel keys during the ID run. However, you can stop the
ID run at any time by pressing the Off key (
).
During the ID run a progress view is shown.
After the ID run is completed, text
ID run done
is shown.
The LED stops blinking.
If the ID run fails, fault
is shown.
12
After the ID run is completed, text
Done
is shown on row
ID run
.