ACH580 Installation, Operation and Maintenance Manual
121
ACH580 E-Clipse Bypass
Start-up by changing the parameters from the start-up list
To change the parameters, follow these steps:
Start-up by changing the parameters individually from the parameter list
To change the parameters, follow these steps:
1
The
Default Display
indicates the
Bypass Control
mode.
2
Press
ENTER
to enter the
Main Menu.
3
Select the
Startup Params
with the
Up/Down
arrows and press
ENTER
.
4
Select the appropriate
Parameter
with
the
Up/Down
arrows and press
ENTER
.
5
Press the
Up/Down
arrows to change
the
Parameter Value
.
6
Press
ENTER
to store the modified
value or press
ESC
to leave the
Parameter Edit
mode.
or
7
Press
ESC
to return to the
Main Menu
,
and again to return to the.
Default
Display
.
1
The
Default Display
indicates the
Bypass Control
mode.
2
Press
ENTER
to enter the
Main Menu.
3
Select the
Parameter List
with the
Up/
Down
arrows and press
ENTER
.
4
Select the appropriate
Parameter
Group
with the
Up/Down
arrows and
press
ENTER
.
5
Select the appropriate
Parameter
in a
group with the
Up/Down
arrows and
press
ENTER
.
DRIVE SELECTED
BYPASS IN OFF
ENTER
*BYPASS STATUS
STARTUP PARAMS
ENTER
BYPASS STATUS
*STARTUP PARAMS
ENTER
*1601 START/STOP
1613 BP DISABLE
1601 START/STOP
[ 1:DI1 ]
ENTER
ESC
*1601 START/STOP
1613 BP DISABLE
ESC
DRIVE SELECTED
BYPASS IN OFF
DRIVE SELECTED
BYPASS IN OFF
ENTER
*BYPASS STATUS
STARTUP PARAMS
ENTER
STARTUP PARAMS
*PARAMETER LIST
ENTER
14 RELAY OUT
*16 SYSTEM CTRL
ENTER
*1601 START/STOP
1602 PERMISSIVE