manualshive.com logo in svg

Aastra 6730I, Руководство администратора

Aastra 6730I - это превосходный IP-телефон с множеством функций, который позволяет улучшить ваше коммуникационное опыт. Для получения более подробной информации об этом продукте, скачайте бесплатное Administrator'S Manual с нашего веб-сайта. manualshive.com.

Поделиться
Скачать
background image

 Administrator Level Options

41-001343-02 REV05 – 07.2014

3-17

XML Beep Support

Note:

This option can be set by both 
Users and Administrators.

xml beep notification

Enables or disables the playing of a beep to indicate a status on the phone. When the 
phone receives a status message, the BEEP notifies the user that the message is dis-
playing. 

For more information on this feature, see 

“XML Beep Support”

 on 

page 5-64

.

Status Scroll Delay (seconds)

Note:

This option can be set by both 
Users and Administrators.

xml status scroll delay

Allows you to set the time delay, in seconds, between the scrolling of each status 
message on the phone. 

For more information on this feature, see 

“Status Scroll Delay”

 on 

page 5-65

.

Switch UI Focus to Ringing 
Line

Note:

This option can be set by both 
Users and Administrators.

switch focus to ringing line

Enables or disables whether or not the UI focus is switched to a ringing line while the 
phone is in the connected state.

For more information on this feature, see 

“Switch Focus to Ringing Line”

 on 

page 5-

66

.

Call Hold Reminder During 
Active Calls

Note:

This option can be set by both 
Users and Administrators.

call hold reminder during 
active calls

Enables or disables the ability for the phone to initiate a continuous reminder tone 
on the active call when another call is on hold. When this feature is disabled, a ring 
splash is heard when the active call hangs up and there is still a call on hold.

For more information on this feature, see 

“Call Hold Reminder During Active Calls”

 on 

page 5-67

.

Call Hold Reminder

Note:

This option can be set by both 
Users and Administrators.

call hold reminder

Enables or disables the reminder ring splash timer to start as soon as you put a call on 
hold (even when no other calls are active on the phone). When enabled, the phone 
initiates a reminder ring splash periodically for the single call on hold. When disabled, 
no reminder ring splash is audible.

For more information on this feature, see 

“Call Hold Reminder (on Single Hold)”

 on 

page 5-68

.

call hold reminder timer

Note:

This option can be set by an 
Administrator only.

Specifies the time delay, in seconds, that a ring splash is heard on an active call when 
another call was placed on hold. For example, if a call comes into Line 1, and then a 
call comes into Line 2 and you answer Line 2, Line 1 is automatically placed on hold. 
While on the active Line 2, after 7 seconds, a ring splash audio sounds on the line 
reminding you that the call on Line 1 is still on hold. This timer begins to increment 
after Line 2 is answered.

Notes:
•

This parameter is used with the “call hold reminder frequency” parameter.

•

You must enable this “call hold reminder timer” parameter for it to work.

•

A value of “0” disables the call hold reminder feature.

For more information on this feature, see 

“Call Hold Reminder Timer & Frequency”

 on 

page 5-69

.

call hold reminder frequency

Note:

This option can be set by an 
Administrator only.

Specifies the time interval, in seconds, between each ring splash sound on the active 
line. For example, if a call comes into Line 1, and then a call comes into Line 2 and you 
answer Line 2, Line 1 is automatically placed on hold. While on the active Line 2, after 
7 seconds, a ring splash audio sounds on the line reminding you that the call on Line 
1 is still on hold (determined by the “call hold reminder timer” parameter), and then 
the ring splash is heard again after 60 seconds (determined by this parameter).

Notes:
•

You must enable the “call hold reminder” and/or “call hold reminder during active 
calls” parameter(s), and the “call hold reminder timer” parameter, for this parameter 
to work.

•

A value of “0” prevents additional rings.

For more information on this feature, see 

“Call Hold Reminder Timer & Frequency”

 on 

page 5-69

.

Parameter in 
Aastra Web UI

Parameter in Configuration 
Files

Description

Содержание 6730I

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 6730I

Uniden VP100 Quick Installation Manual preview
VP100
Бренд: Uniden Страницы: 16
Haier M350 Manual Del Usuario preview
M350
Бренд: Haier Страницы: 57
Damall D-2304 Setup Manual preview
D-2304
Бренд: Damall Страницы: 7
H3C Aolynk EP302 User Manual preview
Aolynk EP302
Бренд: H3C Страницы: 68
Unify OpenScape Desk Phone IP 55G Quick Reference Card preview
OpenScape Desk Phone IP 55G
Бренд: Unify Страницы: 2
Xorcom XP0150G Quick Installation Manual preview
XP0150G
Бренд: Xorcom Страницы: 2
Samsung SCH-R970C User Manual preview
SCH-R970C
Бренд: Samsung Страницы: 251
TCL V6201 User Manual preview
V6201
Бренд: TCL Страницы: 25
iBall bravo 1.8E User Manual preview
bravo 1.8E
Бренд: iBall Страницы: 17
Opel mobile FlipPhone 4 Operator'S Manual preview
FlipPhone 4
Бренд: Opel mobile Страницы: 76
Serioux RM X401 Instruction Manual preview
RM X401
Бренд: Serioux Страницы: 24
Alcatel 1L Pro User Manual preview
1L Pro
Бренд: Alcatel Страницы: 56
Planet VIP-1120PT Quick Installation Manual preview
VIP-1120PT
Бренд: Planet Страницы: 8
Sony Ericsson Xperia Play R800A White Paper preview
Xperia Play R800A
Бренд: Sony Ericsson Страницы: 19
Doro PhoneEasy 337ip Manual preview
PhoneEasy 337ip
Бренд: Doro Страницы: 144
Shenzhen JR168-900 User Manual preview
JR168-900
Бренд: Shenzhen Страницы: 57
Grandstream Networks 100 Sereis User Manual preview
100 Sereis
Бренд: Grandstream Networks Страницы: 53
Polycom Soundpoint IP550 Quick Start Manual preview
Soundpoint IP550
Бренд: Polycom Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды