UP Plus 3D Printer User Manual
1. Introduction
1.1 How to use this
This User Manual is divided into four sections which cover
and Troubleshooting. Please
according to these instructions
1.2 Precautions
Please read this section carefully before using the printer
1.2.1 Safety
The printer can only be used with
may be damaged, with a risk of
To avoid burning, or model deformation, d
or any other part of the body
printing.
Protective glasses should always be worn when removin
The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please
do not hold the extruder block with the gloves.
There is a slight smell from ABS when it is being extruded. The smell is,
pleasant. Operate in a well ventilated room
prints. When ABS is burnt is releases toxic fumes.
Do not use ABS plastic or its printed parts near any kind of heat source, flames,
incense, light bulbs, rockets etc. ABS will catch fire and burn a thick black smoke.
Always have adult supervision when children are present. Please keep all small printed parts away
from young children, choking hazards! There are sever
HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose
clothing. Keep fingers away from moving parts.
Tools and parts should be stored at a suitable height away from sm
Tools should be used in conjunction with safety gloves
2.
3D Printer User Manual v 2013.6.10
ntroduction
to use this manual
is divided into four sections which cover the Introduction, Overview, Operation,
Please study this manual carefully before installation, and
instructions. Keep this manual handy and refer to it when necessary.
carefully before using the printer.
used with the power adapters supplied by this company, or
d, with a risk of fire.
or model deformation, do not touch the model, nozzle, or the platform by hand
part of the body, while the printer is working or immediately after it has
Protective glasses should always be worn when removing support material, especially PLA.
The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please
do not hold the extruder block with the gloves.
There is a slight smell from ABS when it is being extruded. The smell is, however, not too u
well ventilated room but draught free. Draughts can affect warping of ABS
prints. When ABS is burnt is releases toxic fumes.
Do not use ABS plastic or its printed parts near any kind of heat source, flames, fireworks, candles,
etc. ABS will catch fire and burn a thick black smoke.
Always have adult supervision when children are present. Please keep all small printed parts away
from young children, choking hazards! There are several safety issues, small tools, sharp tools and
HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose
clothing. Keep fingers away from moving parts.
be stored at a suitable height away from small children.
Tools should be used in conjunction with safety gloves and glasses.
2. Overview
Introduction, Overview, Operation,
and use the printer
to it when necessary.
supplied by this company, or the product
o not touch the model, nozzle, or the platform by hand,
immediately after it has finished
g support material, especially PLA.
The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please
however, not too un-
raughts can affect warping of ABS
fireworks, candles,
etc. ABS will catch fire and burn a thick black smoke.
Always have adult supervision when children are present. Please keep all small printed parts away
al safety issues, small tools, sharp tools and
HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose
