3D Printing Systems Up Plus Скачать руководство пользователя страница 33

Страница: 33 / 56

UP Plus 3D Printer User Manual

Support Options (Smart Support)

The software’s Smart Support is where the

software will automatically calculate where it

requires support material. The Bunny on the

left was printed with 80 degree support and

then the support material is broken away to

reveal the end result on the right

mended setting is 30 or 10 degrees.

Support

Angle at

support material only gets used if angle of surface is

horizontal

hang), If set to 50° than support material is used for any surface

horizontal. In the image on the left of a green curve, the red indicates the amount

material, changing the angle higher will produce more support.

Set to > 10°

4. Troubleshooting

3D Printer User Manual v 2013.6.10

Semi-Hollow Honeycomb

Hollow Honeycomb:

The Part is made

low, which gives you the weakest part

time. Parts with flat top surfaces can

with this setting.

(Smart Support)

software’s Smart Support is where the

software will automatically calculate where it

requires support material. The Bunny on the

left was printed with 80 degree support and

then the support material is broken away to

on the right. The recom-

degrees.

Support Angle:

(Recommended Angle:30)

at which support material gets inserted. For example if 10

support material only gets used if angle of surface is greater

horizontal (so support material is almost not used unless there is a direct ove

than support material is used for any surface that is greater than 5

In the image on the left of a green curve, the red indicates the amount

material, changing the angle higher will produce more support.

Set to > 50°

Troubleshooting

The Part is made mostly hol-

part but faster print

Parts with flat top surfaces can slightly droop

. For example if 10° is used,

greater than 10° from

(so support material is almost not used unless there is a direct over-

is greater than 50° away from

In the image on the left of a green curve, the red indicates the amount of support

Содержание Up Plus

























































Результаты поиска

Содержание Up Plus

Отзывы:

Похожие инструкции для Up Plus

Бренды по названию

Популярные бренды

3D Printing Systems Up Plus, Руководство пользователя

Результаты поиска

Содержание Up Plus

Отзывы:

Похожие инструкции для Up Plus

Бренды по названию

Популярные бренды