UP Plus 3D Printer User Manual
Move the mouse pointer onto
presented in a floating window, as
(Windows version)
TIP:
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
for more information.
Unloading the model:
click the
load” on the toolbar or click the
appear. Choose unload the model or
want to remove all of them).
Saving the model: Choose the model, then
size is 12%~18% of the original STL
transfer files.
Note on STL files:
For a model to print correctly, all the faces of the models need to have their
normal facing outwards. The U
The default colour used by the software when opening a model is a light grey/pink co
normals are facing the wrong way, then the model is coloured in red.
or saving it as an UP3 file and reopening it.
4. Troubleshooting
3D Printer User Manual v 2013.6.10
the model, and click the left mouse key. Some model
indow, as shown below:
(Mac version)
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
the left mouse button on the model to select it (Pink)
the right mouse button while over the model and a context menu will
hoose unload the model or unload all models (if you have more than one file open and
hoose the model, then click “Save”. The file is saved in UP3 format
size is 12%~18% of the original STL file. This is a convenient format for users to
For a model to print correctly, all the faces of the models need to have their
normal facing outwards. The UP software uses colour Red to indicate a problem with a
The default colour used by the software when opening a model is a light grey/pink co
are facing the wrong way, then the model is coloured in red. Try fixing it with the Fix tool
or saving it as an UP3 file and reopening it.
Troubleshooting
odel information is
(Mac version)
You can open several models and print them all at the same time. Just repeat the open model
procedure for each model you want to add. See the “Placing models on the build platform” section
(Pink), and click “Un-
and a context menu will
s (if you have more than one file open and
UP3 format and its
for users to archive or
For a model to print correctly, all the faces of the models need to have their
problem with a model.
The default colour used by the software when opening a model is a light grey/pink colour. If the
Try fixing it with the Fix tool
