3D Printing Systems Up Plus Скачать руководство пользователя страница 41

Страница: 41 / 56

UP Plus 3D Printer User Manual

5.2 Removing Support Material

Printed models are composed of two parts. One part is the model itself, and the other part is the

support material used to support any overhanging parts of the model.

The support material is the same physical material as the model material, but the support material

is printed at a lower density. It is very easy to distinguish the model from the support material so it

is easy to remove.

Have a look at the teapot in the ab

material still attached and the right

The support material gets removed using a combination of tools. Some material can easily be

cracked off by hand. Support material close to

the knife and cutters.

It takes some practice to get comfortable with removing support material

an enjoyable and therapeutic task

Pulling the support off by hand will normally cause ABS fatigue

tic goes white from stress). You can easily get the original colour of the ABS back

brushing of Acetone (nail varnish remover)

TIP: If you find it difficult to remove the Support or Raft try print

open, but watch out for warping.

CAUTION: ALWAYS WEAR SAFETY GLASSES WHEN REMOVING SUPPORT MATERIAL,

ESPECIALLY WITH PLA MATERIAL.

4. Troubleshooting

3D Printer User Manual v 2013.6.10

Removing Support Material

Printed models are composed of two parts. One part is the model itself, and the other part is the

support material used to support any overhanging parts of the model.

e support material is the same physical material as the model material, but the support material

is printed at a lower density. It is very easy to distinguish the model from the support material so it

Have a look at the teapot in the above pictures. The left picture shows the teapot with its support

and the right picture shows the teapot with support material removed

removed using a combination of tools. Some material can easily be

ked off by hand. Support material close to the model is easier to remove us

It takes some practice to get comfortable with removing support material, but it can become quite

an enjoyable and therapeutic task!

off by hand will normally cause ABS fatigue white marks (were the ABS pla

tic goes white from stress). You can easily get the original colour of the ABS back

of Acetone (nail varnish remover) or a quick wave over with a heat gun.

TIP: If you find it difficult to remove the Support or Raft try printing with the extruder door

open, but watch out for warping.

CAUTION: ALWAYS WEAR SAFETY GLASSES WHEN REMOVING SUPPORT MATERIAL,

ESPECIALLY WITH PLA MATERIAL.

Troubleshooting

Printed models are composed of two parts. One part is the model itself, and the other part is the

e support material is the same physical material as the model material, but the support material

is printed at a lower density. It is very easy to distinguish the model from the support material so it

left picture shows the teapot with its support

picture shows the teapot with support material removed.

removed using a combination of tools. Some material can easily be

the model is easier to remove using tools such as

, but it can become quite

marks (were the ABS plas-

tic goes white from stress). You can easily get the original colour of the ABS back with a slight

ing with the extruder door

CAUTION: ALWAYS WEAR SAFETY GLASSES WHEN REMOVING SUPPORT MATERIAL,

Содержание Up Plus

























































Результаты поиска

Содержание Up Plus

Отзывы:

Похожие инструкции для Up Plus

Бренды по названию

Популярные бренды

3D Printing Systems Up Plus, Руководство пользователя

Результаты поиска

Содержание Up Plus

Отзывы:

Похожие инструкции для Up Plus

Бренды по названию

Популярные бренды