UP Plus 3D Printer User Manual
When paused you can “Withdraw” and “Extrude” filament.
the extruder and platform heater working, it is not suggested to pause for long periods of
time.
•
Status bar:
The bottom status bar shows the current layer that is currently being printed
and the remaining time to complete the job.
•
Intilise Switch:
By holding down the
print job, bring the platform down and then put the printer into sleep mode.
Print Options:
Speed:
Fine, Normal or Fast. This simply determines the speed at which the printe
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
large surface area parts, the Fine
part and the corners are therefore more likely to lift a little bit.
UnSolid Model:
This function is useful for printing ST
file is a fully enclosed surface
surfaces. If your file is not perfect, this option should allow you to print it anyway.
TIP:
Once the print has started, you can unplug the
stored in the printer’s internal memory, so the
4. Troubleshooting
3D Printer User Manual v 2013.6.10
When paused you can “Withdraw” and “Extrude” filament.
Warning:
By pausing keeps
the extruder and platform heater working, it is not suggested to pause for long periods of
The bottom status bar shows the current layer that is currently being printed
and the remaining time to complete the job.
By holding down the front switch on the printer, will
the platform down and then put the printer into sleep mode.
. This simply determines the speed at which the printe
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
large surface area parts, the Fine setting can be problematic as the printer takes longer to print the
part and the corners are therefore more likely to lift a little bit.
This function is useful for printing STL files that are not perfect. A perfect STL
osed surface (water tight), with no holes in the surface skin, and no overlapping
If your file is not perfect, this option should allow you to print it anyway.
Once the print has started, you can unplug the USB cable from the PC. The print
stored in the printer’s internal memory, so the computer is no longer required.
Troubleshooting
By pausing keeps
the extruder and platform heater working, it is not suggested to pause for long periods of
The bottom status bar shows the current layer that is currently being printed
abort the current
the platform down and then put the printer into sleep mode.
. This simply determines the speed at which the printer moves. As a
general rule, the slower you print, the better the quality of the parts. For tall parts, running at Fast
speed can be problematic as the printer can vibrate to the extent that print quality is affected. For
setting can be problematic as the printer takes longer to print the
files that are not perfect. A perfect STL
, with no holes in the surface skin, and no overlapping
If your file is not perfect, this option should allow you to print it anyway.
PC. The print job is
