UP Plus 3D Printer User Manual
3.3.6 Print Preferences
Click menu “3D Print->Setup
box opens:
Recommended Settings in red
pending on the model you are printing.
Windows version Mac version
Z Resolution:
Sets the print resolution (layer
0.4mm per layer. The finer the layer thickness, the better quality, the stronger the printed part and
the longer it takes to print.
Fill:
There are four types of honeycomb
ages below show the four different internal fill types.
4. Troubleshooting
3D Printer User Manual v 2013.6.10
Preferences
>Setup” or Click “print” and select “Preferences’ and the following dialog
in red and in most cases are the only values that require changing d
pending on the model you are printing.
Windows version Mac version
resolution (layer thickness) of the printer. This can be between 0.2
the layer thickness, the better quality, the stronger the printed part and
types of honeycomb fill that the interior of parts are made of. These cut away i
show the four different internal fill types.
Solid Honeycomb:
The part is made
plastic, which gives you the strongest part
longer print time. This setting is recommended for
strong and functional parts.
Semi-Solid Honeycomb
Troubleshooting
he following dialog
and in most cases are the only values that require changing de-
of the printer. This can be between 0.2mm per layer to
the layer thickness, the better quality, the stronger the printed part and
These cut away im-
art is made of nearly solid
plastic, which gives you the strongest part with a
. This setting is recommended for
