UP Plus 3D Printer User Manual
quantity should be set to 700 grams.
with is ABS or PLA.
TIP:
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
weigh it, and subtract 280 grams from the weight. This gives you the value to enter into the mat
rial text box.
Status:
Displays the temperature of
Stop All:
Stops heating and all the movement of the printer. Once
model being printed is cancelled
stopped. After you use the “Stop All” option, you will need to re
Pause Print:
This button allows you to pause a print in mid
print job where it left off. This is very useful if you, for example, want to change the material co
our mid-print. Another popular use for pausing a job mid
into printed cavities and then printed
truder and platform heating during the pause, it’s not recommended to pause for long periods of
time.
Nozzle & Platform:
The five buttons
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
ward.
The “To” button controls the height of the platform
procedure described in 3.3.2.
The “Bottom” button returns the platform to the lowest position.
Set Nozzle Height:
Takes whatever value you have in the “To” box and transfers it to the Nozzle
box of the setup screen.
4. Troubleshooting
3D Printer User Manual v 2013.6.10
quantity should be set to 700 grams. You can also specify whether the material you are printing
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
280 grams from the weight. This gives you the value to enter into the mat
the temperature of the nozzle and platform.
heating and all the movement of the printer. Once you click this button, the
cancelled. You CANNOT resume a print job once the printer has been
After you use the “Stop All” option, you will need to re-initialise the printer.
This button allows you to pause a print in mid-progress, you can
print job where it left off. This is very useful if you, for example, want to change the material co
print. Another popular use for pausing a job mid-print is to allow fasteners to be inserted
into printed cavities and then printed over to lock the fastener into place.
Note:
This keeps the e
truder and platform heating during the pause, it’s not recommended to pause for long periods of
ive buttons (FL, FR, Center, NL, NR) control the position of the
and the platform. The nozzle moves to the left and right; the platform moves forward and bac
the height of the platform, and is used in the nozzle height calibration
the platform to the lowest position.
Takes whatever value you have in the “To” box and transfers it to the Nozzle
Troubleshooting
You can also specify whether the material you are printing
An empty spool weighs about 280 grams so, if you are installing a partially used spool,
280 grams from the weight. This gives you the value to enter into the mate-
click this button, the current
You CANNOT resume a print job once the printer has been
the printer.
u can then resume the
print job where it left off. This is very useful if you, for example, want to change the material col-
print is to allow fasteners to be inserted
This keeps the ex-
truder and platform heating during the pause, it’s not recommended to pause for long periods of
position of the nozzle
and the platform. The nozzle moves to the left and right; the platform moves forward and back-
used in the nozzle height calibration
Takes whatever value you have in the “To” box and transfers it to the Nozzle
