Chapter 6 Tutorials
XS1920 Series User’s Guide
49
Figure 27
Tutorial: Check the Binding If DHCP Snooping Works
6.3 How to Use DHCP Relay on the Switch
This tutorial describes how to configure your Switch to forward DHCP client requests to a specific
DHCP server. The DHCP server can then assign a specific IP address based on the information in the
DHCP requests.
6.3.1 DHCP Relay Tutorial Introduction
In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) to DHCP client
A
based on the system name, VLAN ID and
port number in the DHCP request. Client
A
connects to the Switch’s port 2 in VLAN 102.
Figure 28
Tutorial: DHCP Relay Scenario
6.3.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
1
Access the web configurator through the Switch’s management port.
2
Go to
Basic Setting
>
Switch Setup
and set the VLAN type to
802.1Q
. Click
Apply
to save the
settings to the run-time memory.
VLAN 102
DHCP Server
Port 2
PVID=102
172.16.1.18
A
192.168.2.3
Summary of Contents for XS1920 Series
