Chapter 24 Multicast
XS1920 Series User’s Guide
196
24.4 IPv6 Multicast Status
Click
Advanced Application
>
Multicast > IPv6 Multicast
to display the screen as shown. This
screen shows the IPv6 multicast group information. See
for more
information on multicasting.
Figure 132
Advanced Application > Multicast > IPv6 Multicast
The following table describes the fields in the above screen.
Add
Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Clear
Click
Clear
to reset the fields to the factory defaults.
Profile Name
This field displays the descriptive name of the profile.
Start Address
This field displays the start of the multicast address range.
End Address
This field displays the end of the multicast address range.
Delete Profile
Select a profile’s check box to select a specific profile. Otherwise, select the check box in
the table heading row to select all profiles.
Delete Rule
Select the check box(es) of the rule(s) that you want to remove from a profile.
Delete
To delete the profile(s) and all the accompanying rules, select the profile(s) that you want
to remove in the
Delete Profile
column, then click the
Delete
button.
To delete a rule(s) from a profile, select the rule(s) that you want to remove in the
Delete
Rule
column, then click the
Delete
button.
Cancel
Click
Cancel
to clear the
Delete Profile
/
Delete Rule
check boxes.
Table 85
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering
Profile (continued)
LABEL
DESCRIPTION
Table 86
Advanced Application > Multicast > IPv6 Multicast
LABEL
DESCRIPTION
Index
This is the index number of the entry.
VID
This field displays the multicast VLAN ID.
Port
This field displays the port number that belongs to the multicast group.
Multicast Group
This field displays IP multicast group addresses.
Group Timout
This field displays the time (in seconds) that elapses before the Switch removes a MLD
group membership entry if it does not receive report messages from the port.
Summary of Contents for XS1920 Series
