XS1920 Series User’s Guide
116
C
H A P T E R
11
Static Multicast Forward Setup
11.1 Static Multicast Forward Setup Overview
This chapter discusses how to configure forwarding rules based on multicast MAC addresses of
devices on your network.
Use these screens to configure static multicast address forwarding.
11.1.1 What You Can Do
Use the
Static Multicast Forward Setup
screen (
) to configure rules to
forward specific multicast frames, such as streaming or control frames, to specific port(s).
11.1.2 What You Need To Know
A multicast MAC address is the MAC address of a member of a multicast group. A static multicast
address is a multicast MAC address that has been manually entered in the multicast table. Static
multicast addresses do not age out. Static multicast forwarding allows you (the administrator) to
forward multicast frames to a member without the member having to join the group first.
If a multicast group has no members, then the switch will either flood the multicast frames to all
ports or drop them.
shows such unknown multicast frames flooded to all ports. With
static multicast forwarding, you can forward these multicasts to port(s) within a VLAN group.
shows frames being forwarded to devices connected to port 3.
shows frames being
forwarded to ports 2 and 3 within VLAN group 4.
Figure 81
No Static Multicast Forwarding
Summary of Contents for XS1920 Series
