Chapter 11 Static Multicast Forward Setup
XS1920 Series User’s Guide
118
The following table describes the labels in this screen.
Table 46
Advanced Application > Static Multicast Forwarding
LABEL
DESCRIPTION
Active
Select this check box to activate your rule. You may temporarily deactivate a rule without
deleting it by clearing this check box.
Name
Type a descriptive name (up to 32 printable ASCII characters) for this static multicast MAC
address forwarding rule. This is for identification only.
MAC Address
Enter a multicast MAC address which identifies the multicast group. The last binary bit of the
first octet pair in a multicast MAC address must be 1. For example, the first octet pair
00000001 is 01 and 00000011 is 03 in hexadecimal, so 01:00:5e:00:00:0A and
03:00:5e:00:00:27 are valid multicast MAC addresses.
VID
You can forward frames with matching destination MAC address to port(s) within a VLAN
group. Enter the ID that identifies the VLAN group here. If you don’t have a specific target
VLAN, enter 1.
Port
Enter the port(s) where frames with destination MAC address that matched the entry above
are forwarded. You can enter multiple ports separated by (no space) comma (,) or hyphen (-
). For example, enter “3-5” for ports 3, 4, and 5. Enter “3,5,7” for ports 3, 5, and 7.
Add
Click
Add
to save your rule to the Switch’s run-time memory. The Switch loses this rule if it is
turned off or loses power, so use the
Save
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to reset the fields to their last saved values.
Clear
Click
Clear
to begin configuring this screen afresh.
Index
Click an index number to modify a static multicast MAC address rule for port(s).
Active
This field displays whether a static multicast MAC address forwarding rule is active (
Yes
) or
not (
No
). You may temporarily deactivate a rule without deleting it.
Name
This field displays the descriptive name for identification purposes for a static multicast MAC
address-forwarding rule.
MAC Address
This field displays the multicast MAC address that identifies a multicast group.
VID
This field displays the ID number of a VLAN group to which frames containing the specified
multicast MAC address will be forwarded.
Port
This field displays the port(s) within a identified VLAN group to which frames containing the
specified multicast MAC address will be forwarded.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the
Delete
check boxes.
Summary of Contents for XS1920 Series
